Error codes

What a robot’s error code means, from the maker’s own directory, with a link to the page where the maker says what to do about it.

Type the code from the teach pendant, or words from the message. Each directory is grouped the way the maker prints it: by robot generation, then by section.

3,516 codes from ABB Robotics · page 67 of 88

110706 · There is a hardware fault.

ABB Robotics · IRC5 with RobotWare 5, manual revision K

110707 · External temperature too high.

ABB Robotics · IRC5 with RobotWare 5, manual revision K

110708 · Stop circuit open, no +24V.

ABB Robotics · IRC5 with RobotWare 5, manual revision K

110709 · Circuit breaker tripped, weld without command.

ABB Robotics · IRC5 with RobotWare 5, manual revision K

110710 · Current feedback open.

ABB Robotics · IRC5 with RobotWare 5, manual revision K

110711 · Current feedback short circuit.

ABB Robotics · IRC5 with RobotWare 5, manual revision K

110712 · No primary voltage on first half wave.

ABB Robotics · IRC5 with RobotWare 5, manual revision K

110713 · No current, weld 1 to 3.

ABB Robotics · IRC5 with RobotWare 5, manual revision K

110714 · Current is too low, weld 1 to 3.

ABB Robotics · IRC5 with RobotWare 5, manual revision K

110715 · Current is too high, weld 1 to 3.

ABB Robotics · IRC5 with RobotWare 5, manual revision K

110716 · Current is low in consecutive welds, weld 1 to 3.

ABB Robotics · IRC5 with RobotWare 5, manual revision K

110717 · Weld time is too short, weld 1 to 3.

ABB Robotics · IRC5 with RobotWare 5, manual revision K

110718 · Weld time is too long, weld 1 to 3.

ABB Robotics · IRC5 with RobotWare 5, manual revision K

110719 · Faulty configuration

ABB Robotics · IRC5 with RobotWare 5, manual revision K

110720 · Data value outside limits.

ABB Robotics · IRC5 with RobotWare 5, manual revision K

110721 · Timer not connected

ABB Robotics · IRC5 with RobotWare 5, manual revision K

110722 · Unknown fault in weld timer.

ABB Robotics · IRC5 with RobotWare 5, manual revision K

110723 · Power unit not ready.

ABB Robotics · IRC5 with RobotWare 5, manual revision K

110724 · 27~V Synchronisation, power fault.

ABB Robotics · IRC5 with RobotWare 5, manual revision K

110725 · 24V off or too low.

ABB Robotics · IRC5 with RobotWare 5, manual revision K

110726 · Transformer temperature too high.

ABB Robotics · IRC5 with RobotWare 5, manual revision K

110727 · Cooling temperature too high.

ABB Robotics · IRC5 with RobotWare 5, manual revision K

110728 · IO bus fault.

ABB Robotics · IRC5 with RobotWare 5, manual revision K

110729 · Electrode life has expired, end of stepper.

ABB Robotics · IRC5 with RobotWare 5, manual revision K

110730 · Tip dress request.

ABB Robotics · IRC5 with RobotWare 5, manual revision K

110760 · Tool Change Error

ABB Robotics · IRC5 with RobotWare 5, manual revision K

110790 · Medar WT: No contact with Medar.

ABB Robotics · IRC5 with RobotWare 5, manual revision K

110801 · Dispense Error

ABB Robotics · IRC5 with RobotWare 5, manual revision K

110802 · Dispense Error

ABB Robotics · IRC5 with RobotWare 5, manual revision K

110803 · Dispense Error

ABB Robotics · IRC5 with RobotWare 5, manual revision K

110804 · Dispense Error

ABB Robotics · IRC5 with RobotWare 5, manual revision K

110805 · Dispense Error

ABB Robotics · IRC5 with RobotWare 5, manual revision K

110806 · Dispense Error

ABB Robotics · IRC5 with RobotWare 5, manual revision K

110807 · Dispense Error

ABB Robotics · IRC5 with RobotWare 5, manual revision K

110808 · Dispense Error

ABB Robotics · IRC5 with RobotWare 5, manual revision K

110809 · Dispense Error

ABB Robotics · IRC5 with RobotWare 5, manual revision K

110810 · Dispense Error

ABB Robotics · IRC5 with RobotWare 5, manual revision K

110811 · Dispense Error

ABB Robotics · IRC5 with RobotWare 5, manual revision K

110812 · Dispense Error

ABB Robotics · IRC5 with RobotWare 5, manual revision K

110813 · Dispense Error

ABB Robotics · IRC5 with RobotWare 5, manual revision K

ABB Robotics 110706

There is a hardware fault.

What to do: p. 377 of ABB’s directory All ABB Robotics codes

MakerABB Robotics

Applies toIRC5 with RobotWare 5, manual revision K

Page377

The directory gives no cause for this code; the maker’s notes on it are on page 377.

From ABB’s own error code directory. The steps to fix it are the maker’s and are on the page linked above, not copied here.